Master Airbrush · 50 products
Master Airbrush Kits, Compressors and Airbrushes
Gravity feed and siphon feed airbrushes, dual-fan compressors and the hoses that join them.
Photo: Shixart1985, CC BY 2.0
Where to start in the range
Master Airbrush Cool Runner II Deluxe Kit
Cool Runner II Deluxe Kit: G22 airbrush, tank compressor and 24 acrylic colors.
Check price on AmazonMaster Airbrush Cordless Airbrushing System Kit
Cordless kit with a rechargeable compressor and a 0.4mm dual-action airbrush.
Check price on AmazonMaster Airbrush G22 Dual-Action Gravity Feed Airbrush
G22 gravity feed airbrush on its own, for an existing air supply.
Check price on Amazon
Master Airbrush TC-320 Cool Runner II Compressor
TC-320 Cool Runner II compressor with regulator, gauge and water trap.
Check price on AmazonMaster Airbrush kits with compressor and paint
Each kit pairs an air compressor with one to three airbrushes, a hose and a starter set of colors, so the first session needs nothing extra. The kits split by medium: acrylics for models and crafts, water-based colors for face and body art, food colors for cakes, and nail paints with stencils. If a compressor already sits on your bench, the standalone airbrushes in the next line save you a second one.
Master Airbrush Cool Runner II Deluxe Kit
Complete airbrush system with tank compressor, gravity feed airbrush and 24 acrylic colors.
- G22 dual-action gravity feed airbrush, 0.3 mm tip
- TC-326T 1/5 hp single-piston compressor
- Two cooling fans
- 3 liter air storage tank
- 24 acrylic colors in 1 oz bottles
- 6 foot braided air hose
Master Airbrush Cool Runner II Face Paint Kit
Face and body art airbrush system with sixteen water-based colors and three airbrushes.
- TC-320 compressor, 1/5 HP with 2 cooling fans
- Airbrushes: G22, S68 and E91
- 16 water-based colors, 1 oz bottles
- Water-based, non-toxic, FDA compliant paint
- Quick release coupler with 3 plugs
- Dual airbrush holder and air hose
Master Airbrush Cake Decorating Airbrush Kit
Complete food airbrush system for decorating cakes and cookies with three airbrushes and food colors.
- 3 airbrushes: G22, S68 and E91
- TC-77 air compressor with small storage tank
- Gravity feed and siphon feed options
- 2 air hoses included
- 12 Chefmaster food colors, 0.7 fl oz bottles
- Model: KIT-CAKE-SALON3
Master Airbrush Cool Runner Three-Airbrush System Kit
Tank compressor kit with gravity and siphon feed airbrushes plus six acrylic colors.
- TC-426 compressor, 1/5 HP single-piston
- 3 liter air storage tank
- G22 and G34 dual-action gravity feed airbrushes
- E91 single-action siphon feed, 0.8mm tip
- 10-foot braided air hose
- Warranty: 5 Year Manufacturer
See all airbrush kits 10 items
Gravity feed and siphon feed airbrushes
These are airbrushes only, with no compressor in the box, for adding a second tool or replacing a worn one. Tips run from 0.2 mm for hairline detail to 0.8 mm for broad sign and T-shirt spray, and each fluid cup or bottle ranges from 1/16 oz to 3/4 oz. Gravity feed models suit small amounts and quick color changes, while siphon feed bottles hold more paint for wide coverage.
Master Airbrush G22 Dual-Action Gravity Feed Airbrush
Standalone gravity feed airbrush for hairline detail through to background spray.
- 0.3mm needle and nozzle
- 1/3 oz. gravity fluid cup
- Dual-action trigger
- Background spray up to 1-1/2 inches
- Airbrush only, no compressor
Master Airbrush G255 Dual-Action Gravity Feed Airbrush Kit
Dual-action gravity feed airbrush with three interchangeable tip sizes for detail and coverage work.
- Dual-action gravity feed
- 0.2, 0.3 and 0.5mm needles and tips
- 1/6 oz fluid cup
- Quick disconnect coupler with air flow control valve
- Model: G255-SET
Master Airbrush SB88 Dual-Action Side Feed Airbrush Set
Side feed airbrush with three tip sizes for detail and background spraying.
- 0.3, 0.5 and 0.8 mm nozzle sets
- 1/2 oz push-fit gravity fluid cup
- Fluid cup fits either side
- Spray width up to 2 inches
- Cutaway handle and fluid control knob
- Light to heavy viscosity paints
Master Airbrush E91 Single-Action Siphon Feed Airbrush Set
Starter siphon feed airbrush set for broad-pattern hobby, craft and sign work.
- Single-action, external mix design
- 0.8mm needle
- 1/8" air inlet
- 3/4 oz siphon feed fluid bottles
- 1/8" braided hose and 5' plastic hose
- Propellant regulator in the set
See all airbrushes 10 items
Master Airbrush air compressors, from mini to 1 HP
The line runs from a 12V mini compressor to a 1 HP dual-piston unit with a 9 liter tank. Most Cool Runner models pair a 1/5 HP motor with two cooling fans and run at 47 dB, which keeps them cool running through long sessions. Airflow is the deciding figure: up to 0.85 CFM serves airbrush work, while the TC-600 and TC-626 have the air for several stations or small air tools.
Master Airbrush TC-320 Cool Runner II Compressor
Quiet, oil-less dual-fan air compressor with a carrying handle for portable airbrush work.
- 1/5 HP single-piston, 2 cooling fans
- 0.8 CFM, 25 liters per minute
- Pressure range 0 to 57 PSI
- Diaphragm regulator with gauge and water trap
- Oil-less, 47 dB
- Holder for 2 airbrushes
Master Airbrush Cool-Runner TC-426 Tank Compressor
Turquoise 1/5 HP dual-fan compressor with a 3-liter tank for steady airbrush pressure.
- 3 liter air storage tank
- 1/5 HP single-piston, oil-less
- 25 liters/minute, 0.85 CFM
- 47 dB operation
- Auto off at 65 psi, on at 51 psi
- Color: Turquoise
Master Airbrush TC-77 Compressor with Small Tank
Portable, quiet air compressor with a small tank for steady air pressure at the airbrush.
- 1/8 HP portable airbrush compressor
- Airflow: 18 liters per minute
- 47 dB
- Regulator with gauge and mini in-line moisture filter
- 6-foot braided air hose
- Built-in handle and airbrush holder
Master Airbrush TC-600 3/5 HP Air Compressor
3/5 HP tank compressor with enough airflow to run three airbrushes.
- 3/5 HP piston motor
- 4 liter air storage tank
- 48 liters/minute, 1.7 CFM
- Oil-less, 69 dB operation
- Double-gear switch, up to 116 psi
- 10-foot braided hose, holder for 3 airbrushes
See all air compressors 10 items
Airbrush hoses, couplers and water traps
This line connects the compressor to the airbrush and keeps that air dry. Nearly every piece uses 1/8" BSP threads, from the 6, 10 and 25 foot braided airbrush hose options to the quick release coupling, splitters and in-line trap filter. Two parts break the pattern: the 6 foot hose has one 1/4" end, and the 4-way metered manifold takes a 1/4" inlet.
Master Airbrush 10 Foot Braided Airbrush Hose
Nylon braided airbrush hose with silicone tubing for connecting compressors and airbrushes.
- Length: 10 feet
- 1/8" BSP female on both ends
- Silicone internal tubing
- Tightly woven nylon braided cover
- Kink and tear resistant
- Color: Blue
Master Airbrush Mini Pressure Regulator with Water Trap
Diaphragm regulator with gauge and water trap for moisture-free airbrush air.
- Operating pressure up to 100 PSI
- True diaphragm design
- Pressure gauge
- Built-in water trap filter
- Quick-release drain valve
- Transparent collection chamber
Master Airbrush Quick Release Disconnect Coupling
Brass coupling for switching airbrushes quickly on a single air hose.
- 1/8" BSP male and female fittings
- Coupling with matching plug
- Color: Brass
- Automatic air shut-off on disconnect
- Part number TF-117
Master Airbrush 4-Way Metered Airbrush Manifold
Metered manifold for setting air pressure separately for each connected airbrush.
- 1/4" BSP female inlet
- Four 1/8" BSP male outlets
- Control valve knob per outlet
- Includes 1/4" to 1/8" BSP inlet adapter
- Color: Silver
See all hoses and fittings 10 items
Cleaning, repair and bench accessories
This line keeps an airbrush working once the paint goes in: brushes and micro needles for clogged tips, a cleaning pot for flush-outs, repair kits and stands for the bench. Unlike the hoses next door, none of it sits on the air line. Both repair kits fit only the G22, G23, G24, G25, G26, G34 and G39.
Master Airbrush 3-in-1 Cleaning Pot with Holder
Cleaning pot that catches overspray and holds the airbrush between uses.
- 3-in-1 cleaning pot and holder
- Lid doubles as color palette and water cap
- 4 replacement filters included
- Model TP-50
- Pack of 1
Master Airbrush Airbrush Cleaning Kit
Twenty-five piece brush and tool set for cleaning airbrushes and spray guns.
- 25 pieces
- 13 micro needle sizes
- 5-piece mini-brush set
- Double-sided dental pick
- 2 tube cleaning brushes
- 16 oz polyethylene cleaning bottle
Master Airbrush 18-Piece Major Repair Kit
Eighteen-part major kit for rebuilding seven compatible Master Airbrush models.
- 18 parts in the major kit
- Fits models G22, G23, G24, G25, G26, G34, G39
- Color: Silver
- Part number MAS P20-Major
Master Airbrush 4-Airbrush Holder Station
Swivel and tilt tabletop stand that holds up to four airbrushes.
- Holds up to 4 airbrushes
- Four rubber suction cups on base
- 360-degree rotating base
- Individual swivels on lower two holders
- Color: Black and Yellow
- Airbrushes not included
See cleaning and accessories 10 items
What sets Master Airbrush equipment apart
Two cooling fans on the Cool Runner II
The Cool Runner II compressors set two cooling fans around a 1/5 HP single-piston motor. The motor is oil-less and runs at 47 dB, a level suited to a home studio. Those fans let the compressor run long sessions without overheating, and the TC-420 holds an operating temperature of about 100°F.
Tank models that hold steady pressure
A 3 liter storage tank on the TC-326T and TC-426 smooths out the piston pulse, so pressure at the tip stays constant. The motor switches off at its cut-off, 57 psi on the TC-326T and 65 psi on the TC-426, and restarts when the tank drops to 43 or 51 psi. Air is supplied on demand instead of the motor running nonstop.
Interchangeable tips and cups
Several airbrushes ship with three needle and nozzle sizes, 0.2, 0.3 and 0.5 mm, so one body covers hairline lines and wider fills. The SB84 converts between gravity and siphon feed, and the SB88 takes its fluid cup on either side. The G76 adds a pistol trigger with three cup sizes for anyone used to a spray gun.
One 1/8" fitting standard across the air line
Hoses, couplers, splitters, regulators and water traps in the range share 1/8" BSP threads. The quick release coupling shuts the air off automatically on disconnect, so airbrushes swap on a single hose. A hose, coupler or water trap added later threads straight onto the existing setup.
Materials, paints and care
The hoses are nylon braided, and the 10 foot blue hose adds silicone internal tubing under a tightly woven cover that resists kinks and tears. The quick release coupling is brass. Spare paint jars are clear glass 1/8 inch thick with screw-on plastic lids, and the cleaning brushes are stainless steel with nylon bristles.
Paint changes from kit to kit, so match the color set to the surface. The acrylic kits carry water-based acrylics in 1 oz bottles, the face paint kit has 16 water-based, non-toxic, FDA compliant colors, and the cake kit uses Chefmaster food colors. For thinning, the graduated pipettes measure in 0.5 ml steps up to 2.0 ml; they are plastic and not meant for the strongest solvents.
Moisture spoils a clean spray pattern. A water trap on the regulator, or the 5-micron TF-12 trap that mounts on the airbrush, holds condensation back, and the drain valve empties it. After each session, flush the airbrush into the 3-in-1 cleaning pot, whose lid doubles as a palette, then clear the tip with micro needles. When parts wear, the minor and major repair kits rebuild the G22 family.
| Braided hose cover | Nylon braided |
|---|---|
| 10 ft hose inner tubing | Silicone |
| Quick release coupling | Brass, 1/8" BSP |
| Paint jars | Clear glass, 1/8 inch thick, screw-on plastic lids |
| Cleaning brushes | Stainless steel with nylon bristles |
| Face paint | Water-based, non-toxic, FDA compliant |
| Cake colors | Chefmaster food colors, 0.7 fl oz bottles |
| In-line water trap | 5-micron filter, spring-loaded release valve |
| Pipettes | Disposable plastic, 0.5 to 2.0 ml graduations |
| Compressor motors | Oil-less on Cool Runner, TC-600 and TC-626 models |
Pick your setup before the next project
Kits, airbrushes, compressors and fittings with tip sizes, cup volumes and airflow set out side by side.
Browse the catalogueWho each Master Airbrush setup suits
Model and auto graphics painters
Scale models and auto graphics call for fine lines and broad coats on the same piece. The Twin-Piston kit covers that spread with a G22 at 0.3mm, an S68 at 0.35mm and an E91 at 0.8mm, so both gravity feed and siphon feed are on hand. Its air filter water trap with pressure regulator lets you drop the air pressure for detail passes.
Cake and cookie decorators
Home bakers and bakery decorators get a food-only setup in the cake kit: 12 Chefmaster colors, a TC-77 air compressor with a small tank and three airbrushes. Single-action and dual-action control come in the same box. Two air hoses let a second decorator work from the one compressor.
Makeup and nail artists on the move
Away from a power outlet, the cordless kit runs over 30 minutes per charge at 20 to 36 psi and recharges in 35 minutes. That fits a makeup booking or a nail table at an event. If your sessions run well past half an hour of continuous spraying, plan a recharge break or choose a plug-in compressor.
Face painters at parties and events
A line of faces to paint calls for washable color and quick airbrush changes. The face paint kit has 16 water-based colors, a quick release coupler with three plugs and a dual holder. Switching from the gravity feed G22 to the siphon feed S68 or E91 means unplugging one airbrush and plugging in the next.
About the Master Airbrush range
This catalogue covers five lines: complete kits, standalone airbrushes, air compressors, hoses and fittings, and cleaning and bench accessories. Fifty products in all, from a 12V mini compressor to a 1 HP workshop unit with a 9 liter tank.
The range is built around the airbrush itself. Gravity feed models make up most of it, from the 0.2 mm G45 with its fine dot pattern to the pistol-trigger G76, with siphon feed in the S68, E91 and convertible SB84. Six of the ten kits include a G22, the same body both repair kits are made for.
The Cool Runner name covers most of the compressors, with fan cooling and, on the tank models, auto shut-off at a set pressure. Above them sit the TC-600 and TC-626, which run several airbrushes or small air tools such as nail guns and spray guns.
The accessories tie the lines together: braided hoses, quick release couplings, splitters and metered manifolds share 1/8" BSP threads. Whether you paint models, cakes, nails, faces or car panels, the parts swap and combine instead of locking you into one fixed set.
Questions to settle before you order
Will a standalone airbrush work with a compressor you already own?
Which compressor runs two or three airbrushes at once?
Which repair kit fits which airbrush?
What comes in the cordless kit, and how long does it run?
How do you keep water out of the airbrush air?
Which kit carries a manufacturer warranty?
Master Airbrush compressors side by side
Motor, airflow, tank and noise level for each compressor in the line.
| Master Airbrush | Motor | Airflow | Air tank | Noise | Check price on Amazon |
|---|---|---|---|---|---|
| Master Airbrush TC-320 Cool Runner II | 1/5 HP single-piston, 2 fans | 0.8 CFM, 25 l/min | None | 47 dB | Check price on Amazon |
| TC-326T tank compressor from Master Airbrush | 1/5 HP single-piston | 0.8 CFM, 25 l/min | 3 liter | 47 dB | Check price on Amazon |
| Master Airbrush Cool Runner TC-420 | 1/5 HP single-piston | 0.85 CFM, 25 l/min | None | 47 dB | Check price on Amazon |
| Master Airbrush TC-426 Cool-Runner tank model | 1/5 HP single-piston | 0.85 CFM, 25 l/min | 3 liter | 47 dB | Check price on Amazon |
| Compact TC-77 by Master Airbrush | 1/8 HP | 18 l/min | Small tank | 47 dB | Check price on Amazon |
| Master Airbrush TC-600, 3/5 HP | 3/5 HP piston | 1.7 CFM, 48 l/min | 4 liter | 69 dB | Check price on Amazon |
| Master Airbrush TC-626 1 HP workshop unit | 1 HP dual-piston | 3 CFM, 85 l/min | 9 liter | 70 dB | Check price on Amazon |
Build your airbrush setup the right way
Kits, gravity and siphon feed airbrushes, Cool Runner compressors, hoses and cleaning gear. Check the specs and today’s price on Amazon.